DH25 SERIES
40 - 100 HP — 72” 96”
• Cat. 1 & 2 hitch
• 20” or 22” Notched blades
• 3” Square frame tube
• 7-1/2” Blade spacing
• Angle front and rear gangs up to 21 degrees
• Adjustment handle to aid in angling
• 1/2” Thick bearing hangers with two 5/8” U-bolts
• Self aligning, sealed ball bearings
• 1-1/8” Square, high carbon steel gang axle
• 4” x 3” Gang tube
• Optional disc scrapers are adjustable
• Optional 9” center sweep shank
27
Heavy-duty 1/2” thick bearing
hangers resist the high torque
from two 5/8” U-bolts.
Disc scrapers are
available to reduce
build-up on discs.
* Wider cutting may be obtained by adjusting
complete gang on gang tube. Adjusting too wide
can leave strip in center of unit. Center sweep can
help alleviate this.
|
Krell Industries TV Converter Box STUDIO 2 User Manual
Lanier Car Amplifier 480 0239 User Manual
Leica Digital Camera CRF 1200 User Manual
Magnavox DVD Player DP170MW8 User Manual
Makita Planer 98202 User Manual
Makita Trimmer UH 5530 UH 6330 User Manual
Manitowoc Ice Ice Maker G 0200 User Manual
M Audio Computer Hardware 1010LT User Manual
Melissa Coffeemaker 245 021 User Manual
Memorex Stereo System MKS2461 User Manual